Setup guide

In our example Pro Tools inputs/outputs A1-B8 are ANA 1-24 of Alpha-Link 1, and Pro Tools B9-B16 are AES or ADAT
1
-8 of Alpha-Link 1. Pro Tools C1-D8 are ANA 1-24 of Alpha-Link 2, and Pro Tools D9-D16 are AES or ADAT
1-8 of Alpha-Link 2. If you prefer to have all the Analogue inputs/outputs of both Alpha-Links listed first, followed
by the all the AES/EBU or ADAT of both Alpha-Links, select A9-B16 and B9-B16 in the left-hand side column and
click the
Delete Path button. Then click the Default button again. The deleted paths will reappear at the bottom of
t
he list. The ‘first’ 48 inputs/outputs will be Analogue, and the ‘last’ 16 will be AES/EBU or ADAT. When you create
64 tracks in the Pro Tools mixer and increment the outputs, you will have all the Analogue on the left and all the
AES/EBU or ADAT on the right. Click the Settings button if you want to save this configuration so that you can
reload it later, for example when loading a session from another studio.
Page 12