Setup guide

Audio I/O Routing
Getting Audio into Pro Tools
Analogue and Digital inputs to MADI outputs:
In order to receive external signals in Pro Tools, the Alpha-Links’ Analogue and Digital
(
AES/EBU or ADAT) inputs need to be routed to the Alpha-Link MADI outputs (the signals
will then reach the Delta-Link MADI inputs).
• Press the OUTPUT button repeatedly until the MADI output LED is lit, then hold
i
t down
• While holding the OUTPUT button, press the INPUT button repeatedly until the AES
or ADAT and ANA LEDs are lit
This must be done on both Alpha-Links
Getting Audio out of Pro Tools
In order to play back signals from Pro Tools, the Alpha-Links’ MADI inputs need to be
routed to the Alpha-Link Analogue and Digital (AES/EBU or ADAT) outputs.
MADI inputs to digital (AES/EBU or ADAT) outputs:
• Press the OUTPUT button repeatedly until the AES or ADAT output LED is lit, then
hold it down
• While holding the OUTPUT button, press the INPUT button repeatedly until the
MADI LED is lit
This must be done on both Alpha-Links
MADI inputs to Analogue outputs:
• Press the OUTPUT button repeatedly until the ANA output LED is lit, then hold it down
• While holding the OUTPUT button, press the INPUT button repeatedly until the
MADI LED is lit
This must be done on both Alpha-Links
Page 7