User guide

Pro Tools|HD Native User Guide30
Configuring Low Latency
Monitoring in the I/O Setup
The Output page of the I/O Setup lets you enable
(or disable) Low Latency Monitoring. It also lets
you specify any available Output path for Low
Latency Monitoring. The Output path for Low
Latency Monitoring can be of any channel
width (from Mono to 7.1). Low Latency Moni-
toring uses Outputs 1–2 by default.
To configure Low Latency Monitoring in the I/O
Setup:
1 Open the I/O Setup dialog (Setup > I/O).
2 Click the Output tab.
3 Enable the Low Latency Monitoring option.
4 From the Low Latency Monitoring pop-up menu,
select the Output path you want to use for Low
Latency Monitoring.
5 Click OK to save your changes and close the
I/O Setup.
Low Latency Monitoring and
Bounce To Disk
With Low Latency Monitoring enabled, only audio
tracks are included with the Bounce to Disk com-
mand—Auxiliary Input and Instrument tracks
are ignored. To include Auxiliary Input and In-
strument tracks, disable Low Latency Monitoring
before using Bounce to Disk.
Selecting the Output path for Low Latency Monitoring
External input cannot be recorded during a
Bounce to Disk. To include external input in
your bounce, it must be recorded to new au-
dio tracks before using Bounce to Disk.