Setup guide

Chapter 5: Making Studio Connections 69
SYNC peripherals integrate into the Loop Sync
configuration of a Pro Tools|HD system, offering
extremely fast lockup, near-sample accurate syn-
chronization, and an exceptionally low-jitter
clock. These features provide professional per-
formance and maximum audio fidelity under a
wide range of synchronization conditions.
Connecting Ethernet Control
Surfaces
If you are using a built-in Ethernet port or a PCI
or PCIe Ethernet card to connect your computer
directly (rather than across a network) to a
D-Control
®
, D-Command
®
, ProControl
™
,
C|24
™
, or Control|24
™
, the TCP/IP address must
be set manually. The default manual settings
will work in most cases. Do not use DHCP unless
your computer is connected to a network that
provides DHCP services.
For more information, refer to the SYNC HD
Guide.