Specifications

Focusrite D2 and D3 Plug-ins Guide 2
System Requirements
To use Focusrite D2 or D3, you need the following:
• An iLok USB Smart Key
• An iLok.com account for managing iLok li-
censes
◆ One of the following:
• A Digidesign-qualified Pro Tools system.
• A Digidesign-qualified Pro Tools system
and a third-party software application that
supports the Digidesign TDM, RTAS, or
AudioSuite plug-in standard.
• A qualified Avid
®
Xpress
®
, Avid Xpress DV
or Avid DNA™ system.
• A Digidesign-qualified VENUE system
(TDM only)
For complete system requirements, visit the
Digidesign website (www.digidesign.com).
Compatibility Information
Digidesign can only assure compatibility and
provide support for hardware and software it
has tested and approved.
For a list of Digidesign-qualified computers, op-
erating systems, hard drives, and third-party de-
vices, refer to the Digidesign website
(www.digidesign.com).
Register Your Plug-ins
If you purchase a plug-in online from the Digi-
Store (www.digidesign.com) using Internet Acti-
vation, you are automatically registered.
If you purchase a plug-in boxed version, check
the included Digidesign Registration Informa-
tion Card for information about how to register
online.
Registered users receive periodic software up-
date and upgrade notices.
Please refer to the Digidesign website
(www.digidesign.com) or the Digidesign Regis-
tration Information Card for information on
technical support.
Working with Plug-ins
Besides the information provided in this guide,
refer to the
DigiRack Plug-ins Guide for general
information on working with plug-ins, includ-
ing:
• Inserting Plug-ins on Tracks
• Clip Indicators
• The Plug-in Window
• Adjusting Parameters
• Automating Plug-ins
• Using the Librarian