Specifications

Chapter 3: Focusrite D2 11
Link Button
Selecting the Link button allows you adjust pa-
rameters for both channels simultaneously. By
default, Link mode is enabled so that you can
easily maintain parity between the parameter
settings for both channels.
You can also use Link mode to help you main-
tain a relative offset between parameters settings
on the two channels.
Maintaining an offset:
1 Deselect the Link button.
2 Select the desired channel button, left or right,
and adjust the parameters for that channel.
3 Select Link mode and adjust the same param-
eters for the opposite channel. D2 will maintain
the relative offset between the parameter set-
tings for the two channels.
Alt-click (Windows) or Option-click (Mac)
while linking channels with offsets to copy
the parameters of the active channel to the
opposite channel (including input and out-
put levels).