Specifications

Chapter 3: Focusrite D2 13
Link Button
Selecting the Link button allows you adjust param-
eters for both channels simultaneously. By default,
Link mode is enabled so that you can easily main-
tain parity between the parameter settings for both
channels.
You can also use Link mode to help you maintain
a relative offset between parameters settings on the
two channels.
Maintaining an offset:
1 Deselect the Link button.
2 Select the desired channel button, left or right,
and adjust the parameters for that channel.
3 Select Link mode and adjust the same parame-
ters for the opposite channel. D2 will maintain
the relative offset between the parameter set-
tings for the two channels.
Alt-click (Windows) or Option-click (Mac)
while linking channels with offsets to copy
the parameters of the active channel to the
opposite channel (including input and
output levels).