Specifications
Chapter 8: DINR 71
To enable either of these features, click the cor-
responding button. To disable them, click again.
To process a region with the BNR AudioSuite
plug-in:
1 Select the desired regions in the target tracks
or the Audio Regions List. Only tracks and re-
gions that are selected will be processed.
2 From the Pro Tools AudioSuite menu, choose
BNR.
3 Click Learn to capture the noise signature of
the selected material. If you have selected more
than one track or region, BNR will build the
noise signature based on the first selected track
or region when used in Mono mode, or the first
two selected track or region when used in Stereo
mode.
4 Click Fit or Super Fit to create a Contour Line
that matches the noise signature.
5 Click Preview to begin playback of the se-
lected material.
6 Adjust BNR parameters and fine-tune the
noise reduction using the techniques explained
earlier in this chapter.
7 To hear the noise components that are being
removed, click Audition. Adjusting BNR’s pa-
rameters while toggling this on and off will al-
low you to fine-tune the noise reduction. It also
allows you to hear exactly how much signal is
being removed with the noise, and adjust your
parameters accordingly.
8 If unwanted artifacts are generated by the
noise reduction process, click Post-processing.
For best results, set the Response and Release pa-
rameters to zero.
To begin AudioSuite processing:
1 Adjust the AudioSuite File parameters. These
settings will determine how the file is processed
and what effect the processing will have on the
original regions. Here are some guidelines:
◆ To process the selected region only in the
track in which it appears, choose Playlist from
the Selection Reference pop-up.
– or –
To process the selected region in the Audio Re-
gions List only, choose Region List from this
pop-up.
◆ To process and update every occurrence of the
selected region throughout your session, enable
the Use In Playlist button (and also choose Re-
gion List from the Selection Reference pop-up).
– or –
If you do not want to update every occurrence
of the selected region, disable the Use In Playlist
button.
BNR AudioSuite