Specifications

Digidesign Plug-Ins Guide54
Using D2 in Stereo
Because Focusrite D2 has a single set of Filter pa-
rameter knobs, when it is used in stereo, you
must select which channel, left or right, you
want to edit.
Use the Left Channel, Right Channel, and Link
buttons to do this. These controls only appear
when D2 is used in stereo.
Left Channel and Right Channel Buttons
The Left Channel and Right Channel buttons
are used to select which channel is active for pa-
rameter editing.
Selecting the Left Channel button activates the
left channel for editing. Any changes made to
EQ parameters will affect the left channel of the
stereo signal.
Selecting the Right Channel button activates
the right channel for editing. Any changes made
to EQ parameters will affect the right channel of
the stereo signal.
Link Button
Selecting the Link button allows you adjust pa-
rameters for both channels simultaneously. By
default, Link mode is enabled so that you can
easily maintain parity between the parameter
settings for both channels.
You can also use Link mode to help you main-
tain a relative offset between parameters settings
on the two channels.
Maintaining an offset:
1 Deselect the Link button.
2 Select the desired channel button, left or
right, and adjust the parameters for that chan-
nel.
3 Select Link mode and adjust the same param-
eters for the opposite channel. D2 will maintain
the relative offset between the parameter set-
tings for the two channels.
Left Channel, Right Channel, and Link buttons
Option-click (Macintosh) or Alt-click (Win-
dows) while linking channels with offsets to
copy the parameters of the active channel to
the opposite channel (including input and
output levels).