Specifications

Digidesign Plug-Ins Guide52
Low-Mid Peak Filter
The Low-Mid Peak Filter provides three rotary
controls. The upper rotary control adjusts the
center frequency, variable from 33 Hz to
6.4 kHz. The lower left rotary control adjusts the
filter’s amplitude gain or attenuation. Ampli-
tude range is ±15 dB from unity (utilizing a re-
ciprocal curve for both gain and attenuation).
The lower right rotary control adjusts filter “Q”
which is variable from 0.7 to 4.0.
High-Mid Peak Filter
The High-Mid Peak Filter provides three rotary
controls. The upper rotary control adjusts the
center frequency, variable from 120 Hz to
18 kHz. The lower left rotary control adjusts the
filter’s amplitude gain or attenuation. Ampli-
tude range is ±15 dB from unity (utilizing a re-
ciprocal curve for both gain and attenuation).
The lower right rotary control adjusts filter “Q”
which is variable from 0.7 to 4.0.
High-Shelf Filter
The High-Shelf Filter provides two rotary con-
trols: The upper rotary control adjusts the cor-
ner frequency, variable from 3.3 kHz to 18 kHz.
The lower rotary control adjusts the filter’s am-
plitude gain or attenuation. Amplitude range is
±15 dB from unity.
Low-Pass Filter
The 18 dB/octave Low-Pass Filter provides a ro-
tary control for adjusting the filter’s corner cut-
off frequency, variable from 100 Hz to 18 kHz.
Low-Mid Peak Filter
High-Mid Peak Filter
High-Shelf Filter
Low-Pass Filter