Specifications

Digidesign Plug-Ins Guide14
LFE Enable Enables plug-in processing of the
LFE (low frequency effects) channel on a multi-
channel track formatted for 5.1, 6.1, or 7.1 sur-
round formats. To disable LFE processing, dese-
lect this button. For more information on the
LFE channel, refer to the Pro Tools Reference
Guide.
Using the Plug-In window to select a different
plug-in on the same track:
■ Click the Insert Selector and select a plug-in
from the pop-up menu.
To choose a different track:
■ Click the Track Selector and select a track from
the pop-up menu.
To bypass a plug-in:
■ Click the Plug-In window’s Bypass button.
– or –
■ Command-click (Macintosh) or Control-click
(Windows) the plug-in’s Insert button in the
Mix window.
Opening Multiple Plug-In Windows
To reduce screen clutter, Pro Tools normally dis-
plays a single Plug-In window from which you
can edit the parameters of any plug-in in a ses-
sion. If you want, however, you can open addi-
tional Plug-In windows for specific plug-ins.
Once you begin working with multiple Plug-In
windows, you will need to click the Target but-
ton on the plug-in whose parameters you want
to edit using keyboard commands.
Choosing a plug-in from the Plug-In window
Choosing a track from the Plug-In window
When a plug-in insert is bypassed, the In-
sert Selector in the Mix window changes its
color to blue for easy visual reference. If
some, but not all channels of an unlinked
multi-mono plug-in are bypassed, the Insert
Selector appears purple (Pro Tools 6.0) or
half blue and half black (Pro Tools 5.x).
Bypass states indicated by color (Pro Tools 6.0)
Bypass states indicated by color (Pro Tools 5.3)
bypassed (blue)
some channels bypassed (purple)
unbypassed (gray)
bypassed (blue)
some channels bypassed (half blue)
unbypassed (black)