Specifications

DigiRack Plug-Ins Guide64
Selecting the Sum Input button sums the dry in-
put signals (mono or stereo) before processing
them. The dry signal then appears in the center
of the stereo field and the wet, effected signal
will be output in stereo.
Feedback Controls the amount of feedback ap-
plied from the output of the delay into its input.
It also controls the number of repetitions of the
delayed signal. For the feedback feature to func-
tion, the Gain slider must be raised above its
lowest setting.
Pan The pan sliders for each of the four taps con-
trol their apparent location in the stereo field.
Delay Sets the delay time between the original
signal and the delayed signal. The higher the
setting, the longer the delay. This control is ad-
justable from 0–1500 milliseconds (1.5 sec-
onds).
Mix Adjusts the balance between the effected
signal and the original signal and controls the
depth of the effect. Mix is adjustable from 0% to
100%.
Selecting Audio for Processing with
AudioSuite Delay
Because Multi-Tap Delay adds additional mate-
rial to the end of selected audio (a delay tap),
make a selection that is longer than the original
source material so AudioSuite Delay can write it
into the audio file.
Select only the original material, without leav-
ing additional space at the end, will produce a
delay that occurs after the end of the region will
be cut off.
To accommodate for this, place the region in a
track, and select the desired audio plus an
amount of blank space at the end of the region
equal to the amount of delay that you have
added in the plug-in. The plug-in will then have
space at the end of the region in which to write
the final delay.
Ping-Pong Delay
The Ping-Pong Delay plug-in adds a controllable
delay to the original audio signal. Use the Ping-
Pong delay to add spatialization, and panned
echo to audio material. This plug-in feeds back
delayed signals to their opposite channels, cre-
ating a characteristic ping-pong echo effect.
Gain Adjusts the input volume of the Ping-Pong
Delay to prevent clipping or increase the level of
the processed signal.
Mix Adjusts the balance between the effected
signal and the original signal and controls the
depth of the effect. Mix is adjustable from 0% to
100%.
The Ping-Pong Delay plug-in was formerly
called D-fx Ping-Pong Delay. It is fully
compatible with all settings and presets cre-
ated for D-fx Ping-Pong Delay.
Ping-Pong Delay plug-in