Specifications

Chapter 4: Working with AudioSuite Plug-Ins 23
chapter 4
Working with AudioSuite Plug-Ins
AudioSuite plug-ins differ from TDM and RTAS
plug-ins in that they are used to process and
modify audio files on disk rather than nonde-
structively in real time. Depending on how you
configure a non-real-time AudioSuite plug-in, it
will either alter the original source audio file or
create an entirely new audio source file.
AudioSuite plug-ins are accessed through the
AudioSuite menu. The AudioSuite menu sup-
ports Plug-In by Category and Plug-In Favorites
(requires Pro Tools 6.4 or higher).
AudioSuite Plug-Ins
1-Band EQ II Processes audio with high-pass,
low-shelf, high-shelf, low-pass or peak EQ filters,
in a 1-band module.
4-Band EQ II Processes audio with high-pass,
low-shelf, high-shelf, low-pass or peak EQ filters,
in a 4-band module.
Click Creates an audio click as a tempo reference
for performing and recording.
Compressor Processes audio with compression.
Chorus Processes audio with chorusing.
Flanger Processes audio with flanging.
LImiter Processes audio with limiting.
Gate Processes audio with gating.
Expander Gate Processes audio with expander-
gating.
De-esser Processes audio with de-essing to re-
move sibilance.
Duplicate Creates a new, continuous source au-
dio file (and region) from the selection.
Delay Adds up to 10.9 seconds of delay.
Multi-tap Delay Adds up to four independently-
controllable delays to the original audio signal.
AudioSuite menu (standard, non-Category view shown)