Specifications

DigiRack Plug-Ins Guide30
Auditioning Plug-in Settings
When the Plug-in Settings dialog is open, you
can have Pro Tools automatically scroll through
and audition the settings files saved in the plug-
in’s root settings folder or in the current ses-
sion’s Settings folder.
To audition plug-in settings:
1 Click the Settings Select button.
2 From the Settings dialog, click a setting—the
starting point from which you will scroll
through the settings files.
3 Enter a value for the number of seconds that
will elapse between each program change, and
press Enter.
4 Select the option for Increment Patch.
After the specified number of seconds, Pro Tools
selects the next setting.
5 When you are finished auditioning settings,
do one of the following:
• Click Done to stop incrementing patches,
and to close the Plug-In Settings dialog.
– or –
• Select the Increment Patch option to stop
incrementing patches and keep the Plug-In
Settings dialog open.
Multiple Outputs for
Instrument Plug-Ins
(Pro Tools 6.7 and Higher Only)
You can route the output of an instrument plug-
in to the main track outputs and to individual
track inputs on other tracks. This lets you route
multiple samples or synth sounds through sepa-
rate outputs for individual processing.
Main and Auxiliary Plug-In Outputs
When a plug-in that has both main and auxil-
iary outputs is inserted on a track, the plug-in’s
main outputs are routed through the track that
the plug-in is inserted on, and the plug-in’s aux-
iliary mono or stereo outputs are available in the
track input pop-up menu on other tracks.
RTAS Instrument Plug-Ins (and
Other Plug-Ins) on Auxiliary
Inputs
(Pro Tools TDM 6.7 and Higher Only)
RTAS-based instrument plug-ins (and other
plug-ins) can be played through Auxiliary In-
puts, as follows.
•When using an RTAS instrument plug-in
(such as Native Instruments Kontakt) on an
Auxiliary Input, the instrument must be
the first plug-in in the signal flow.
•Once you have added an RTAS instrument
to an Auxiliary Input, other RTAS process-
ing plug-ins may be inserted, but only after
the RTAS instrument plug-in.
For specific information about using multi-
ple plug-in outputs with third-party plug-
ins, consult the documentation from the
plug-in manufacturer.
If none of the inserted plug-ins has auxiliary
outputs, the plug-in category in the track in-
put pop-up menu is grayed out.
RTAS plug-in menu on insert 1 of an Auxiliary Input.