Specifications

DigiRack Plug-Ins Guide18
Track Selector Accesses any non-MIDI track in a
session.
Insert Position Selector Accesses any insert on
the current track.
Plug-In Selector Lets you select any real-time
plug-in installed in the Plug-Ins folder (that is
created when you install Pro Tools).
Effect Bypass Disables the currently displayed
plug-in. This lets you compare the track with
and without the effect.
Convert Plug-In Lets you convert the insert from
a TDM plug-in to an RTAS plug-in of the same
type (or vice-versa). This feature can only be
used on plug-ins that are available in both TDM
and RTAS formats.
Clip LED Lights red to indicate if any meter in a
plug-in has clipped (not available on all plug-
ins). The Plug-In Clip LED follows Pro Tools set-
tings for clip indication (see the Pro Tools Refer-
ence Guide for more information).
Settings Menu Lets you copy, paste, save, and
import plug-in settings.
Librarian Menu Recalls settings files saved in the
plug-in’s root settings folder or in the current
session’s Settings folder. See “Using the Librar-
ian” on page 26.
Next (+) and Previous (–) Setting Buttons
(Pro Tools 6.7 and Higher Only) Let you select
the next or previous plug-in setting from the Li-
brarian menu.
Plug-Ins Settings Select Button (Pro Tools 6.7 and
Higher Only) Accesses the Plug-In Settings dia-
log, which lists the settings files for the current
plug-in. From this list, you can select a new set-
ting, or audition a series of settings.
Compare Toggles between the original saved
plug-in setting and any changes you have made
to it so you can compare them.
Plug-In window (multi-mono 1-Band EQ shown)
Plug-In window (multichannel Compressor shown)
Midi note display in a plug-in header (Bruno shown)
Channel Selector
Link Enable buttons
Master Link button
Phase
Invert
LFE Enable
Phase Invert buttons
MIDI node
You will lose the current settings if they are
not saved before you use the Next and Pre-
vious Setting buttons. Always save your set-
tings to the Librarian menu.