Specifications

Chapter 6: DigiRack Real-Time TDM and RTAS Plug-ins 67
Use this graph as a visual guideline to see how
much dynamics processing you are applying.
The Compressor/Limiter and Expander/Gate
plug-ins also feature an animated, multi-color
cursor in their gain transfer curve displays.
The gain transfer curve of the Compressor/Lim-
iter and Expander/Gate plug-ins shows a mov-
ing ball cursor that shows the amount of input
gain (x-axis) and gain reduction (y-axis) being
applied to the incoming signal.
To indicate overshoots (when an incoming sig-
nal peak is too fast for the current compression
setting) the cursor temporarily leaves the gain
transfer curve.
The cursor changes color to indicate the amount
of compression applied, as follows:
Side-Chain Section
For information on using the Side-Chain section
of the Compressor/Limiter or Expander/Gate,
see “Using the Side-Chain Input in Dynamics
III” on page 76.
Dynamics graph display
Gain transfer curve and cursor showing amount of
compression
Input signal
level (x-axis)
Output signal
level (y-axis)
Threshold
Dynamics III Plug-in Compression Amount
Cursor Color Compression Amount
white no compression
light orange below full ratio
dark orange full ratio amount
See “De-Esser Frequency Graph Display” on
page 75 for information on using the De-
Esser’s graph display.