Specifications

DigiRack Plug-ins Guide 140
To record MIDI from a ReWire client application in
Pro Tools:
1 In Pro Tools, create a new MIDI track.
2 From the track’s MIDI Input selector, select
the ReWire device that you want to record.
3 Record enable the MIDI track.
4 Start recording in Pro Tools.
5 Switch to the ReWire client application.
6 Adjust the parameter for which you want to
record MIDI CC data. Parameter changes are re-
corded to the Pro Tools MIDI track as CC data.
7 When you are done adjusting the parameter,
return to Pro Tools and stop recording.
8 Record disable the MIDI track.
9 From the MIDI Track View selector in the Edit
window, select the view for the CC data you just
recorded.
Selecting the ReWire client device to record MIDI CC
data in Pro Tools
You must select the ReWire device from
which you want to record MIDI controller
data. Leaving the track’s MIDI Input set to
All does not record any MIDI data over Re-
Wire.
Adjusting a parameter in a ReWire client application
(Reason’s SubTractor shown)
If your external MIDI controller is correctly
mapped to the corresponding ReWire client
application’s parameters, and it is correctly
routed through Pro Tools, use your MIDI
controller to adjust the parameter you want
to record.
MIDI CC data recorded from a ReWire client application