Specifications

D-Control Guide58
To assign an input, output, send or insert:
1 Press an Assign switch to enter the corresponding Assign
mode.
2 On the channel where you want to make the assignment,
turn an encoder knob to select from the first level of menu
choices.
3 Press the encoder Select switch to move down and the By-
pass/Mute/Pre switch to move up through menu levels.
4 Do one of the following:
• Press the flashing encoder Select switch or press the flash-
ing Assign switch to confirm the assignment.
– or –
• Press the flashing Escape switch to cancel the assign-
ment.
To assign multiple inputs, outputs, sends, or inserts:
1 Press an Assign switch to enter the corresponding Assign
mode.
2 Turn the encoder knobs and use the encoder Select and By-
pass/Mute/Pre switches to select each assignment.
3 Do one of the following:
• Press the flashing Assign switch to confirm all the assign-
ments at once.
– or –
• Press the flashing Escape switch to cancel all the assign-
ments.
To remove an input, output, send or insert:
1 Press an Assign switch to enter the corresponding Assign
mode.
2 For the assignment you want to remove, press the encoder
Bypass/Mute/Pre switch repeatedly until you reach top level
menu for the assignment.
3 Turn the encoder knob counter-clockwise until no assign-
ment is visible.
4 Do one of the following:
• Press the flashing encoder Select switch or press the flash-
ing Assign switch to confirm the removal.
– or –
• Press the flashing Escape switch to cancel the removal
and restore the assignment.
Removing Plug-in Assignments
You can use the Set to Default switch to quickly remove
plug-in assignments from tracks, without having to go into
Assign mode.
To quickly remove plug-in assignments:
1 Press the Set to Default switch.
2 Press the encoder Select switch for each plug-in assignment
you want to remove.
3 Press the flashing Set to Default switch.
Assigning MIDI Inputs and Outputs on Instrument
Tracks
The Assign Inputs and Assign Outputs switches can be used to
assign the MIDI Inputs and Outputs on Instrument tracks.
To assign a MIDI Input or Output on an Instrument track:
1 Press the Assign Inputs or Assign Outputs switch to enter the
corresponding Assign mode. Encoder row #5 shows MIDI in-
puts/outputs.
2 On each channel where you want to make an assignment,
turn the encoder knob in encoder row #5 to select from the
first level of MIDI menu choices.
3 Press the encoder’s Select switch to move down and the By-
pass/Mute/Pre switch to move up through MIDI menu levels.
4 Do one of the following:
• Press the flashing encoder Select switch or press the flash-
ing Assign switch to confirm the assignments.
– or –
• Press the flashing Escape switch to cancel the assign-
ments.
This method removes the assignments immediately,
and cannot be canceled.