Specifications

D-Control Guide42
LCFTyp (Left CF Bank Size for Track Type) Determines the
number of channels allocated for Custom Fader Tracks mode
in the Left Custom Fader section.
RCFTyp (Right CF Bank Size for Track Type) Determines the
number of channels allocated for Custom Fader Tracks mode
in the Right Custom Fader section.
2 Do one of the following:
• To increment the number of channel strips, press the Soft
Key that corresponds to the preference setting you want
to change.
– or –
• To decrement the number of channel strips, hold Shift
and press the Soft Key that corresponds to the preference
setting you want to change.
3 Hold Control (Windows) or Command (Mac) and press the
Operation switch to exit.
Custom Fader Bank Justification
The Custom Fader Bank Justification preference determines
the distribution of the two available Custom Fader banks on
the control surface.
LCFJst (Left Custom Fader Justification) Determines whether
the Custom Faders controlled by the left Custom Faders sec-
tion are placed at the left, left center, right center, or right of
the Main Unit.
RCFJst (Right Custom Fader Justification) Determines
whether the Custom Faders controlled by the right Custom
Faders section are placed at the left, left center, right center, or
right of the Main Unit.
To set Custom Fader bank justification:
1 In the Soft Keys section, press the Operation switch repeat-
edly to display the page that includes the Custom Fader Bank
Justification preferences (“LCFJst” or “RCFJst”):
2 Repeatedly press the Soft key that corresponds to “LCFJst”
or “RCFJst” to choose between the “Left,” “CenterL,” “Cen-
terR,” and “Right” settings for the corresponding bank of Cus-
tom Faders.
3 Hold Control (Windows) or Command (Mac) and press the
Operation switch to exit.
Display of Hidden Tracks in Custom Faders
You can set D-Control to show hidden tracks in the Custom
Fader views. You can then mix those hidden tracks, but you
cannot select or record-enable them. Hidden track names are
displayed in yellow in the Custom Faders.
To make hidden tracks visible in Custom Fader views:
1 In the Soft Keys section, press the Operation switch repeat-
edly to display the page that includes Custom Fader Tracks
(“CFTrks”).
2 Press the Soft Key that corresponds to “CFTrks” to toggle the
setting between Show Hidden Tracks (“ShwHdn”) and Hide
Hidden Tracks (“HidHdn”).
3 Hold Control (Windows) or Command (Mac) and press the
Operation switch to exit.
Custom Fader Plug-In Mode View Definitions
There are three view options available for display of plug-in
parameters in the channel displays of the Custom Faders.
These options, or view definitions, are accessible from the
D-Control operation preferences.
To set the Custom Fader Plug-In Mode view:
1 In the Soft Keys section, press the Operation switch repeat-
edly to display the page that includes Plug-In View Definitions
(“LPIDef” and “RPIDef”).
2 Repeatedly press the Soft key that corresponds to “LPIDef”
or “RPIDef” to choose between the following settings for the
Plug-In Mode view:
Name View Shows the track name, plug-in name and channel
format of the currently focused plug-in in the channel dis-
plays of the Custom Faders.
Expanded View Shows additional plug-in controls in the chan-
nel displays of the Custom Faders. This view can also be seen
at any time by pressing and holding the Plug-In switch in the
Custom Fader section until the switch flashes. See “Expanded
Plug-In View” on page 130.
Fader View Maintains track names on channel displays and
fader control of track volume while Custom Fader plug-in pa-
rameters are displayed in the channel encoders. Entering Ex-
panded view or Plug-In Map mode automatically exits Fader
view.
3 Hold Control (Windows) or Command (Mac) and press the
Operation switch to exit.