Specifications

Chapter 9: Management and Soft Key Sections 97
Edit Function 3 Switch
The Edit Function 3 switch displays the following commands:
Page 1
• Duplicate: Edit > Duplicate
• Repeat: Edit > Repeat
• Shift: Edit > Shift
• Insert Silnce: Edit > Insert Silence
• Lock Region: Region > Lock/Unlock
• Mute Region: Region > Mute/Unmute
Page 2
• Loop Region: Region > Loop Region
• Unloop Region: Region > Unloop Region
• ID/Rem SyncPT: Region > Identify/Remove Sync Point
• Rename Rgns: Region > Rename Regions
• Quantz ToGrid: Region > Quantize to Grid
• RgnDrop: Region List > Timeline Drop Order >
L to R/Top to Bottom
Edit Modes Switch
The Edit Modes switch displays the Pro Tools Edit modes:
• Shuffl: Shuffle Mode
• Spot: Spot Mode
•Slip: Slip Mode
• Grid Rel: Relative Grid Mode
• Grid Abs: Absolute Grid Mode
Edit Tools Switch
The Edit Tools switch displays the Pro Tools Edit Tools. To cy-
cle through multiple versions of the same tool, repeatedly
press the corresponding Soft Key.
• Zoom: Normal/Single Zoomer tools
• Trim: Standard/Scrub/TCE Trimmer tools
• Select: Selector tool
• Grabbr: Time/Separation/Object Grabber tools
• Scrub: Scrubber tool
• Pencil: Square, Random, Free, Line, Triangle, Arc,
S-Curve
To select the Smart Tool, press any two buttons for the Trim-
mer, Selector or Grabber simultaneously.
Select/MIDI Controls
Bank Select Switch
The Bank Select switch (“Bank Sel”) sets the Soft Keys to mir-
ror the selection in the Bank Select Matrix. When Bank Select
is enabled, the Soft Keys show the names of the Mix/Edit
Groups, Custom Groups, track types, or plug-in page numbers
being controlled by the Bank Select Matrix.
Because the Bank Select Matrix has 12 switches, the Soft Keys
display each bank of twelve in two pages of six. The Soft Key
display is paged by repeatedly pressing the Bank Select switch
in the Soft Keys section.
To page through the currently displayed bank in the Soft Keys:
 Press the Bank Select switch (“Bank Sel”) repeatedly to page
through the current bank.
Memory Location Switch
The Memory Location switch (“Mem Loc”) displays the names
of Memory Locations in pages of six. The Soft Key display is
paged by repeatedly pressing the Memory Location switch in
the Soft Keys section. To page backwards, hold Shift while
pressing the Memory Location switch.
MIDI Switch
The MIDI switch displays the following commands:
Page 1
• Wait Note: Transport Window > Wait for Note button
• Count Off: Transport Window > Countoff button
• Merge Record: Transport Window > MIDI Merge button
• Transpose: Event > MIDI > Transpose
• Veloc: Event > MIDI > Change Velocity
• Click On/Off: Options > Click
Page 2
• Change Tempo: Change Tempo window
• Change Meter: Change Meter window
• Split Notes: Event > MIDI > Split Notes
• Quantz: Event > MIDI > Grid/Groove Quantize
• Input Quantz: Event > MIDI > Input Quantize
Page 3
• Write PTProp: Track > Write MIDI Real Time Properties
• Remove DpNote: Event > Remove Duplicate Notes