Specifications

Chapter 1: Introduction 1
chapter 1
Introduction
PRE is designed especially for use with
Pro Tools
®
systems, but it can also be used as a
stand-alone microphone preamplifier. When
used with Pro Tools, most PRE features can be
controlled from within the Pro Tools applica-
tion.
With or without remote control, PRE can be
configured manually using its front panel
switches and displays.
PRE can also be remotely-controlled by other
MIDI devices through standard MIDI controller
data. See Appendix C, “MIDI Controller Num-
bers.”
PRE Features
• Eight high-performance, discrete matched
transistor hybrid microphone preamplifica-
tion circuits
• Remote control with qualified Pro Tools sys-
tems and control surfaces (such as D-Con-
trol
®
, D-Command
®
, C|24™, and
Command|8
®
)
• Industry-standard DB-25 output connectors
for easy connection to Pro Tools audio inter-
faces or any other recording or mixing me-
dium
• Each channel features:
• Support for microphone (XLR), line level
inputs (1/4-inch), or direct instrument
(1/4-inch)
• Selectable impedance settings for Mic input
• Input gain variable from 0 dB to +69 dB, in
approximately 3 dB steps, with an optional
–18 dB pad
• +48V power for condenser microphones
• Balanced Insert points (Send and Return),
for easy integration of outboard gear (such
as compressors or EQs)
•Phase invert
• 85 Hz High-Pass Filter
• Up to nine PREs supported through software
for up to 72 channels of remote-controlled
preamplification
• All features available in Stand-alone mode
What’s Included
•PRE unit
•AC power cable
•PRE Guide
• Health and Safety Guide
• Registration Information Card