Specifications

PRE Guide20
Configuring MIDI Studio in
AMS for PRE
(Mac Only)
The following are basic instructions for config-
uring PRE in the Apple Audio MIDI Setup appli-
cation (AMS).
To configure your PRE with AMS:
1 Do one of the following:
• Launch the Apple Audio MIDI Setup (Ap-
plications/Utilities).
– or –
• In Pro Tools, choose Setup > MIDI > Studio
Setup.
2 If the MIDI Studio window is not shown in
Audio MIDI Setup, choose Window > MIDI Studio.
3 Do one of the following:
• Double-click the PRE icon.
– or –
• If there is no icon for the PRE, click Add Device
in the toolbar at the top of the window and do
the following:
• Double-click the New External Device icon.
• Select Digidesign as the Manufacturer.
• Select PRE as the Model.
4 Click Properties.
5 Enable the appropriate Channels for the Trans-
mits and Receives options.
6 Click Apply and close the Properties window.
7 Connect the PRE icon to the correct port on
the MIDI interface icon:
• Click the arrow for the output port of the
PRE and drag a connection to the input ar-
row of the corresponding port of the MIDI
interface.
• Click the arrow for the input port of the
PRE and drag a connection to the output
arrow of the corresponding port of the
MIDI interface.
MIDI Device Properties for PRE
Connecting the PRE to the MIDI interface in the AMS
MIDI Studio window