Specifications

Appendix A: Card Removal and Replacement 21
Troubleshooting
If the power ring does not turn from orange to
green when you boot the computer, make sure
you reconnected the DigiLink cable to the Pri-
mary port on the rear of the unit. If the DigiLink
cable is securely fastened and the other end is
plugged into an HD Core or Process card in a
computer that is booted, you may have inad-
vertently disconnected another 50-pin cable
when installing the card.
Hardware Setup Changes
Whenever a card is removed or replaced, the
Hardware Setup I/O routing reverts to original
defaults.