User Manual

Strike Plug-in Guide32
To change the Q-value of an equalizer band:
■ Right-click (Windows or Mac) or Control-click
(Mac) the dot, hold the mouse button and move
up to decrease, or move down to decrease the Q-
value.
All three bands have a bell shape, but at the
minimum Q-value setting switch to:
• Red: Low shelf
• Green: High-pass filter
• Blue: High shelf
Effects Inserts
Strike provides two Effects inserts connected in
series per channel. Select a channel to display its
Equalizer and Effects settings. Strike includes a
broad range of Insert effects.
To select and activate an effect Insert:
■ Click the Insert selector and select an effect
from the pop-up menu. The Insert On/Off but-
ton lights automatically to indicate the effect is
enabled.
To temporarily deactivate the current insert:
■ Click the Insert On button so that the button
is not lit.
To clear the insert of any effects:
■ Click the Insert selector and select “none”
from the pop-up menu.
Editing Effects
Each effect provides its own set of controls. The
maximum number of controls per effect is five.
To adjust a value of an effects Insert:
■ Click and drag the rotary controls (up or
down, or left or right) to change the value of the
parameter. The value of the parameter being ad-
justed is displayed in the Information display
below Strike’s keyboard.
See Appendix B, “Strike Insert Effects” for a
complete list of the provided effects and
their parameters.