User Manual
Table Of Contents
- Contents
- Installation QuickStart
- Welcome to 003 and 003 Rack
- Windows Configuration
- Mac Configuration
- Launching and Configuring Pro Tools LE
- 003 Top Panel
- 003 Operating Modes
- 003 Top Panel Overview
- Display Section
- Fader Section
- Console/Channel View Section
- Transport and Navigation Controls
- Automation Section
- Modifiers Section
- Mic/DI Input Controls
- Monitor Section
- 003 Rack Front Panel
- 003 and 003 Rack Back Panels
- Making Studio Connections
- Getting Sound In and Out of Your 003 or 003 Rack
- Connecting a Microphone
- Connecting Instruments to 003 or 003 Rack
- Connecting Equipment with Digital Ins and Outs
- Word Clock
- Using External Effects Devices
- Monitoring and Recording from Alternate Sources
- Recording from a Digital Device
- Connecting a Recorder for Mixdowns
- MIDI Connections
- Common Tasks with Pro Tools LE
- Pro Tools Mode with 003
- Saving a Session
- Working in Console View
- Working in Channel View
- Display Options in Console and Channel View
- Navigating and Editing Values in Entry Fields
- Working with Tracks
- Assigning Pro Tools Paths (Input, Output, Sends, Inserts)
- Working with Output Windows
- Recording
- Navigating in the Edit Window
- General Editing
- Working With Memory Locations
- Controlling Track Display on the Control Surface
- Working with Automation
- 003 Top Panel Shortcuts
- Configuring MIDI Studio Setup (Windows Only)
- Configuring AMS (Mac OS X Only)
- Utility Mode (003 Only)
- Hard Drive Configuration and Maintenance
- Troubleshooting
003 & 003 Rack Getting Started Guide118
Routing Path for Audio Tests
:
Testing Audio Connections
To test audio connections:
1 Make the necessary connection for the input
and output you are testing. See “Routing Path
for Audio Tests” on page 118.
2 Enter Utility mode. If the Utility switch is not
enabled (flashing), press it.
3 Select the Test menu by pressing the flashing
Insert switch.
The LCD shows the first page of Utility tests.
4 Press the ESC switch to toggle to the second
page of Utility tests.
5 Enter “Audio” test mode by pressing the flash-
ing Inserts (Channel View) switch.
6 Begin an Audio test by pressing the Channel
View switch that corresponds to the test you
want to run.
7 For the S/PDIF In and Out tests, press the Dy-
namics or Insert switch repeated times to toggle
through the different test, or to test all of the
S/PDIF routing paths.
8 When finished, press the flashing Display
switch.
Audio Test Routing Path
Intl Internal loopback of all analog and
digital I/O channels (Analog Input 1
to Analog Output 1, Analog Input 2
to Analog Output 2, and so on).
Sgnl 003 generates a 440 Hz sine wave
on all analog and digital outputs.
Level is adjustable from 0 dB to
–42 dB with the rotary encoder in
the second fader strip.
SpIn 1/2 S/PDIF (RCA) Inputs to Analog
Outputs 1–2.
SpIn 3/4 S/PDIF (RCA) Inputs to Analog
Outputs 3–4.
SpIn 5/6 S/PDIF (RCA) Inputs to Analog
Outputs 5–6.
SpIn 7/8 S/PDIF (RCA) Inputs to Analog
Outputs 7–8.
SpIn All S/PDIF (RCA) Inputs to all Analog
Output pairs.
SpOt 1/2 Analog Inputs 1–2 to S/PDIF (RCA)
Outputs.
SpOt 3/4 Analog Inputs 3–4 to S/PDIF (RCA)
Outputs.
SpOt 5/6 Analog Inputs 5–6 to S/PDIF (RCA)
Outputs.
SpOt 7/8 Analog Inputs 7–8 to S/PDIF (RCA)
Outputs.
SpOt All All Analog input pairs to S/PDIF
(RCA) Outputs.
SpAg Simultaneous routing of S/PDIF
(RCA) Inputs to Analog Outputs 1–2
and Analog Inputs 1–2 to S/PDIF
(RCA) Outputs.
Adat Simultaneous routing of ADAT
Optical Inputs to Analog Outputs
1–8 and Analog Inputs 1–8 to ADAT
Optical Outputs.