User Manual
Table Of Contents
- Contents
- Installation QuickStart
- Welcome to 003 and 003 Rack
- Windows Configuration
- Mac Configuration
- Launching and Configuring Pro Tools LE
- 003 Top Panel
- 003 Operating Modes
- 003 Top Panel Overview
- Display Section
- Fader Section
- Console/Channel View Section
- Transport and Navigation Controls
- Automation Section
- Modifiers Section
- Mic/DI Input Controls
- Monitor Section
- 003 Rack Front Panel
- 003 and 003 Rack Back Panels
- Making Studio Connections
- Getting Sound In and Out of Your 003 or 003 Rack
- Connecting a Microphone
- Connecting Instruments to 003 or 003 Rack
- Connecting Equipment with Digital Ins and Outs
- Word Clock
- Using External Effects Devices
- Monitoring and Recording from Alternate Sources
- Recording from a Digital Device
- Connecting a Recorder for Mixdowns
- MIDI Connections
- Common Tasks with Pro Tools LE
- Pro Tools Mode with 003
- Saving a Session
- Working in Console View
- Working in Channel View
- Display Options in Console and Channel View
- Navigating and Editing Values in Entry Fields
- Working with Tracks
- Assigning Pro Tools Paths (Input, Output, Sends, Inserts)
- Working with Output Windows
- Recording
- Navigating in the Edit Window
- General Editing
- Working With Memory Locations
- Controlling Track Display on the Control Surface
- Working with Automation
- 003 Top Panel Shortcuts
- Configuring MIDI Studio Setup (Windows Only)
- Configuring AMS (Mac OS X Only)
- Utility Mode (003 Only)
- Hard Drive Configuration and Maintenance
- Troubleshooting
003 & 003 Rack Getting Started Guide114
Viewing Firmware Version
Data
This Utility function lets you check the current
firmware version and other statistics useful
when upgrading, or when contacting technical
support.
To display firmware version data:
1 Enter Utility mode. If the Utility switch is not
enabled (flashing), press it.
2 Select Version by pressing the flashing EQ
switch.
The LCD shows version information about vari-
ous components of the unit.
3 To exit and return to the previous Utility
mode display, press the flashing Display Mode
switch.
LCD Display Test
Use this test to assess the performance of the
LCD.
To test the LCD:
1 Enter Utility mode. If the Utility switch is not
enabled (flashing), press it.
2 Select the Test menu by pressing the flashing
Insert switch.
The LCD shows the first page of Utility tests.
3 Select the LCD test by pressing the flashing
Dynamics switch.
The 003 automatically scrolls all of its character
sets across the LCD display.
4 To stop scrolling and quickly tell if any area of
the display is damaged, press and hold any
switch except for the Display Mode switch.
5 Do one of the following:
• To return to the previous Utility page, press
the flashing Display Mode switch.
– or –
• To exit the test at anytime, press the flash-
ing ESC switch or Display Mode switch.
LED Tests
Use this test to display all LEDs simultaneously
or cycle through the LEDs.
To test LEDs:
1 Enter Utility mode. If the Utility switch is not
enabled (flashing), press it.
2 Select the Test menu by pressing the flashing
Insert switch.
The LCD shows the first page of Utility tests.
3 Select the LED menu by pressing the flashing
Insert switch.
4 Do one of the following
• To display all LEDs, press the flashing Dy-
namics switch.
– or –
• To cycle through all the LEDs, press the
flashing Insert switch.
5 To exit the test at anytime, press any switch.