User Manual
Table Of Contents
- Contents
- Installation QuickStart
- Welcome to 003 and 003 Rack
- Windows Configuration
- Mac Configuration
- Launching and Configuring Pro Tools LE
- 003 Top Panel
- 003 Operating Modes
- 003 Top Panel Overview
- Display Section
- Fader Section
- Console/Channel View Section
- Transport and Navigation Controls
- Automation Section
- Modifiers Section
- Mic/DI Input Controls
- Monitor Section
- 003 Rack Front Panel
- 003 and 003 Rack Back Panels
- Making Studio Connections
- Getting Sound In and Out of Your 003 or 003 Rack
- Connecting a Microphone
- Connecting Instruments to 003 or 003 Rack
- Connecting Equipment with Digital Ins and Outs
- Word Clock
- Using External Effects Devices
- Monitoring and Recording from Alternate Sources
- Recording from a Digital Device
- Connecting a Recorder for Mixdowns
- MIDI Connections
- Common Tasks with Pro Tools LE
- Pro Tools Mode with 003
- Saving a Session
- Working in Console View
- Working in Channel View
- Display Options in Console and Channel View
- Navigating and Editing Values in Entry Fields
- Working with Tracks
- Assigning Pro Tools Paths (Input, Output, Sends, Inserts)
- Working with Output Windows
- Recording
- Navigating in the Edit Window
- General Editing
- Working With Memory Locations
- Controlling Track Display on the Control Surface
- Working with Automation
- 003 Top Panel Shortcuts
- Configuring MIDI Studio Setup (Windows Only)
- Configuring AMS (Mac OS X Only)
- Utility Mode (003 Only)
- Hard Drive Configuration and Maintenance
- Troubleshooting
Appendix C: Utility Mode (003 Only) 113
appendix c
Utility Mode (003 Only)
003 is in this mode when the Utility switch is
enabled (flashing). In Utility mode, you can run
pre-programmed diagnostic tests of the 003
unit. The Utility switch is unavailable in
Pro Tools mode.
Utility functions include the following:
• Software and firmware version display
• Tests for the LCD display, LEDs, switches,
rotary encoders, faders, MIDI, and audio.
• Return MIDI Maps to factory default set-
tings. See the 003 MIDI Mode Guide.
Accessing Utility Mode
To enter Utility mode:
1 If Pro Tools is running, choose File > Exit
(Windows) or Pro Tools > Quit (Mac).
2 Press the Utility switch.
The Utility switch flashes when it is enabled.
The LCD shows the top level Utility functions
across the lower row: Version and Test. The cor-
responding Channel View switches flash for
each available Utility option.
Navigating Utility Mode
When running a Utility mode test, you can re-
turn to the previous Utility page or exit the test
at anytime.
To return to the previous Utility page:
Press the flashing Display Mode switch.
To exit a test:
Press the flashing ESC switch or Display Mode
switch.
Exiting Utility Mode
To exit Utility mode:
1 If a test is running, press ESC or Display Mode
to exit the test.
2 Press the flashing Utility mode switch.
Utility mode is not available in Pro Tools
mode. Pro Tools must be closed to enable
Utility mode.