User Manual

Chapter 2: Windows Configuration 11
■ If your computer has only one FireWire port,
connect the FireWire hard drive directly to your
computer and then connect Digi 002 or
Digi 002 Rack to an available FireWire port on
the drive.
4-Pin FireWire Cable
Digi 002 and Digi 002 Rack include a 6-pin to 6-
pin FireWire cable. Some Windows laptops in-
clude a 4-pin FireWire port. To use Digi 002 or
Digi 002 Rack with these computers, a 4-pin to
6-pin cable is required. Purchase this cable
(model #CS625) through your authorized Digi-
design dealer or online through the DigiStore
(www.digidesign.com).
Connecting Other FireWire Devices to
Digi 002 or Digi 002 Rack
The second FireWire port on the Digi 002 or
Digi 002 Rack unit is available for daisy-chain-
ing FireWire devices such as digital cameras or
digital video recorders. Even when it is powered
off, Digi 002 or Digi 002 Rack supplies power
from the computer through its FireWire ports,
letting you recharge batteries in other FireWire
devices.
Installing Pro Tools LE
To install Pro Tools LE on Windows:
1 Make sure you have configured all the re-
quired Windows system settings, and rebooted
your computer. See“Windows System Settings”
on page 8 for more information.
2 Start up Windows, logging in with Adminis-
trator privileges. If you do not have Administra-
tor privileges or do not know how to set them
up, see your Windows User’s Guide.
3 Wait for the Found New Hardware Wizard di-
alog to appear and leave it open (do not press
Next).
4 Insert the Pro Tools Installer CD-ROM for
Windows in your CD-ROM drive. Locate and
open the Pro Tools Installer folder, and double-
click the Setup icon.
5 Click Next to begin installation.
6 Select the components you want to install and
click Next.
7 Wait for the installer to finish installing all
software components, drivers, and PACE System
files before proceeding to the next step.
8 Click Quit when prompted to install Quick-
Time. If required, you can install QuickTime
later (see “Installing QuickTime” on page 12).
9 Restart your computer.
While it is possible to connect a FireWire
hard drive to an available port on Digi 002
or Digi 002 Rack, if the unit is powered off,
any mounted FireWire drives will lose their
data connection with the computer. This
may result in hard drive errors or data loss.
This cable can also be purchased at com-
puter supply stores. Maximum supported
cable length for FireWire (IEEE-1394) is
14 feet (4.3 meters).
If you get a warning dialog about the driver
not passing Windows Logo testing, click
Continue Anyway.