User Manual

Chapter 9: Using Digi 002 as a Stand-Alone Mixer 109
Delay Controls
To access the controls for the onboard Delay:
1 Press the Master Fader switch.
2 Press the Channel Select switch on the Delay
return channel.
The onboard Delay controls are distributed
across the Channel Scribble Strips as shown in
Table 12. The first row of the table shows the
function of the Rotary Encoders, and the bot-
tom row of the table shows the function of the
Channel Select switches in this view.
3 When you are finished setting the Delay con-
trols, press the Escape key to return to the Mas-
ter Fader view.
Reverb Controls
To access the controls for the onboard Reverb:
1 Press the Master Fader switch.
2 Press the Channel Select switch on either of
the Reverb return channels.
The onboard Reverb controls are distributed
across the Channel Scribble Strips as shown in
Table 13. The table shows the function of the
Rotary Encoders in this view.
3 When you are finished setting the Reverb con-
trols, press the Escape key to return to the Mas-
ter Fader view.
Table 12. Delay controls in Digi 002 Stand-alone mode
Display Time Fdbak LPF D —> R
Rotary Encoder
Delay Time Feedback Low-pass Filter Delay Send to Reverb
Channel Select
Pre/Post
Table 13. Reverb controls in Digi 002 Stand-alone mode
Display Room PDly LPF Smer Damp Diff Time
Rotary
Encoder
Room
Type
Pre-Delay
Time
Low-Pass
Filter
Smear Damping Diffusion Reverb
Decay
Time