User guide

Workstation Card Rev 1.2 Layout of this Manual
Genex Research Limited Page 2
Layout of this Manual
Sections in this manual appear in the following order.
1. A brief introduction to the Genex Workstation Interface Card (GX8-WSIF) and how
to fit it into one of the slots
2. A description of what each of the connectors on the back panel is for
3. A description of how connect a GXA8 or GXD8 fitted with a GX8-WSIF card into a
Pro Tools
®
system
4. An explanation how the GXA8 or GXD8 operates under software control when fit-
ted with the card and operated as part of a Pro Tools system
5. Rear panel schematics and connector details