User Guide

Getting Started with Digi 00276
Creating a Return
Auxiliary Input tracks can be created to act as re-
turn channels for busses, as well as for inputs
from hardware sources.
z
To assign a return:
1 Choose File > New Track and specify 1 mono
or stereo Auxiliary Input track, then click Cre-
ate.
2 Click the Input Selector of the Auxiliary Input
track and set it to the bus path you assigned to
the sends on the source tracks.
3 Click the Output Selector of the Auxiliary In-
put track and choose an output path (your main
mix, or other output).
Master Faders
Master Faders are provided, to be used as output
and bus masters. Master Faders can be used for
master level, solo, mute, and insert assignment
(plug-ins or hardware inserts) of any mono or
stereo Output or Bus path. It is recommended
that you use a dithering plug-in on a Master
Fader when you are mastering your final mix
(see “Dither” on page 79).
Audio and Auxiliary Input tracks configured for a send
and return
Send Aux Input
to bus 9–10 input from bus 9–10
Send window
Master Fader controlling main outputs
Dither plug-in applied to final mix
Output assigned to control
main mix (Analog 1–2)