User Guide

Getting Started with Digi 00270
To configure an Auxiliary Input for MIDI
monitoring:
1 Connect the MIDI instrument’s audio output
to the appropriate inputs on your audio inter-
face.
2 Choose File > New Track and specify 1 mono
or stereo Auxiliary Input track, then click Cre-
ate.
3 Click the Input selector of the Auxiliary Input
channel and choose the input to which your
MIDI instrument is connected.
4 Click the Output selector of the Auxiliary In-
put channel and choose an output.
5 Adjust the level of the Auxiliary Input with its
volume fader.
QuickPunch Recording
QuickPunch recording lets you punch in and
out of audio recording on armed tracks. Record-
ing can be triggered from the Transport window,
or using a standard footswitch. You can use a
standard footswitch (such as a keyboard sustain
pedal) with QuickPunch to “punch in” when re-
cording audio. You can also punch in when re-
cording MIDI, without enabling QuickPunch.
To connect a footswitch to Digi 002:
1 Turn off the Digi 002 unit.
2 Plug the footswitch into the Footswitch con-
nector on the back panel of Digi 002.
3 Power up the Digi 002 unit.
To punch in with QuickPunch when recording
audio:
1 Select Operations > QuickPunch.
2 Set input routing and click the Record button
on each audio track you want to punch in. You
can punch in on up to 8 audio tracks while play-
ing back 32 tracks, or you can punch in on up to
16 tracks while playing back 24 tracks.
3 Click Play in the Transport window.
4 Click Record in the Transport window or step
on the footswitch to begin recording (punch in)
on all record-enabled tracks.
5 Click Record in the Transport window or step
on the footswitch again to stop recording
(punch out).
Note that the session continues to play, and you
can continue to punch in and out as many times
as you want.
For more information on QuickPunch and
punch recording, see the
Pro Tools Reference
Guide
.
Footswitch jack (back panel)
Footswitch polarity is detected by Digi 002
firmware when you power up the unit.
Make sure the footswitch is connected and
not pressed when turning on the Digi 002.
With QuickPunch enabled, press Com-
mand+Spacebar (Macintosh) or Ctrl+Spa-
cebar (Windows) to punch in and punch
out.
S / PDIF
IN
OUT
FOOT SWITCH
13941394
OPTICAL
LINK
IN
OUT
Footswitch jack