User Guide

Appendix C: Digidesign WaveDriver (Windows Only) 109
I/O Setup Dialog
Click the Advanced button in the Digidesign
WaveDriver Settings dialog to open the I/O
Setup dialog:
Digi 002 Tab
Peripheral Type
The Peripheral Type will always be set to
Digi 002.
Sample Rate
Available sample rates are 48000 Hz and 44100
Hz. You do not need to change the sample rate
in this dialog before playing or recording a file
with a new sample rate. If you are playing a file,
it will automatically play back at the correct
sample rate. If you are recording a new file, sim-
ply choose the desired sample rate using the au-
dio application's Preferences or Record Options
dialog.
Sync Mode
Sync Mode may be set to Internal or Digital (In-
ternal is the default setting).
Digital Format
This control may be set to S/PDIF or Optical
(S/PDIF is the default setting).
Ch 1–2
This control may be set to Analog or Digital. It
determines whether the WaveDriver plays and
records through the Digi 002 analog or digital
I/O. The WaveDriver can only play and record
through channels 1–2 of the Digi 002.
Identify Checkbox
The Identify checkbox is not available for
Digi 002.
Recalibrate Button
The Recalibrate button is not available for the
Digi 002.
Card Info Tab
Bus, Slot Number
These controls display card specific PCI bus in-
formation and should not be altered.
Figure 11. I/O Setup dialog