User Guide

Appendix C: Digidesign WaveDriver (Windows Only) 107
15 From the Hardware Installation dialog, click
“Continue anyway.” The Digidesign
WaveDriver Setting dialog will automatically
open.
16 Click the Advanced button to open the I/O
Setup dialog.
17 Click the A: No Interface tab.
18 Select Digi 002 for the Peripheral Type.
19 Make any other desired settings in the I/O
Setup dialog.
20 Click OK to close the I/O Setup dialog.
21 Click OK to close the WaveDriver Settings di-
alog.
22 Restart Windows when prompted.
Removing the WaveDriver
To remove the WaveDriver:
1 Choose Start > Control Panel.
2 Click the System icon.
3 Click the Hardware tab.
4 Click the Device Manager button.
5 Expand the “Sound, video, and game control-
lers” section.
6 Double click Digidesign WaveDriver.
7 Choose the Driver tab.
8 Click Uninstall.
How to Change WaveDriver
Settings
To change settings for the WaveDriver:
1 Choose Start > Control Panel.
2 Click the System icon.
3 Click the Hardware tab.
4 Click the Device Manager button.
5 Expand the “Sound, video, and game control-
lers” section.
6 Double click Digidesign WaveDriver.
7 Choose the Properties tab.
8 Expand Audio Devices.
9 Double click Digidesign WaveDriver.
10 In the Digidesign WaveDriver Properties dia-
log, click the Settings button.
The Digidesign WaveDriver Settings dialog ap-
pears.
WaveDriver Settings Dialog
The Digidesign WaveDriver Settings dialog can-
not be accessed under the following circum-
stances:
◆ When Pro Tools LE is running and the Opera-
tions > Active in Background option is enabled.
If you remove the WaveDriver, it is recom-
mended that you also remove the Dal-
wdm.sys file and Pro Tools LE (in that or-
der), and then do a clean install of
Pro Tools LE.
Digidesign WaveDriver Settings dialog