User Guide

Getting Started with Digi 002 2
Digi 002 Capabilities
Audio and MIDI Features
Digi 002 provides the following input and out-
put capacity:
• 8 analog audio inputs (4 with mic preamps),
with A/D converters supporting up to 24-bit,
96 kHz audio
• 48V phantom power on mic preamps, switch-
able in channel pairs
• –10 dBV input pair for direct monitoring of
tape or CD input sources
• 8 analog audio outputs, with D/A converters
supporting up to 24-bit, 96 kHz audio
• Monitor Output pair (+4 dBu) mirrors
Main Outputs 1–2 with dedicated volume
control for direct connection to powered
speakers
• Alternate Main Output pair (–10 dBV) mir-
rors Main Outputs 1–2 for direct output to
–10 dBV devices.
• Stereo headphone output with level control
• Optical connectors for 8 channels of
ADAT I/O (up to 48 kHz) or 2 channels of Op-
tical S/PDIF I/O (up to 96 kHz)
• RCA connectors for 2 channels of S/PDIF dig-
ital I/O supporting up to 24-bit, 96 kHz audio
• 1 MIDI In port and 2 MIDI Out ports, provid-
ing up to 16 channels of MIDI input and up to
32 channels of MIDI output
Control Surface Features
Digi 002 provides an integrated control surface
for software control that includes the following:
• 8 touch-sensitive moving faders and dedi-
cated solo, mute and channel select/record
arm controls
• 8 multi-function rotary encoders for operat-
ing pan, send, and plug-in controls
• Transport and navigation controls
• 10 scribble strips for channel information dis-
play
• Footswitch jack for punching in and out
while recording
Stand-Alone Mixing Features
Digi 002 can be used as a stand-alone 8-channel
digital mixer with the following features:
• 8 analog inputs (4 with mic preamps), with
dedicated volume, pan, solo and mute con-
trols
• Dedicated three-band EQ available on input
channels 1–8
• Dedicated Compressor/Limiter available on
input channels 1–4
• Built-in high-quality Reverb and Delay
• 4 sends on each input channel:
• Sends 1–2 dedicated to internal Delay and
Reverb effects
• Sends 3–4 for integrating external effects
• Stereo outputs with dedicated Master Fader
controls, including:
• Main Output pair (+4 dBu fixed signal)
• Monitor Output pair (+4 dBu) mirrors
Main Outputs 1–2 with dedicated volume
control for direct connection to powered
speakers
• Alternate Main Output pair (–10 dBV) mir-
rors Main Outputs 1–2 for direct output to
–10 dBV devices
• Stereo headphone output with level control
• 10 scribble strips for pan/volume and effects
control, send levels, and track names
• Channel metering available using rotary en-
coder LED rings (in Meter mode)