User guide

4) Make sure to bring up the level of the auxiliary since they default to a negative infinity value.
Pro Tools 5.1 Index | All FAQ Index
[3594]
I'm unable to get MIDI signal into Pro Tools LE via the Digi 001 on OS 9.x.
* Make sure that the Digi 001 OMS driver is in the OMS folder, located in the System folder, and that the 001 is
recognized by the OMS Studio Setup.
* Make sure the "Use Apple SerialDMA when available" is unchecked in the OMS preferences which are located
under the Edit menu of OMS. If you uncheck it, you must restart the CPU for the change to take affect.
* Make sure that you have defined an input device in the OMS Studio Setup for your MIDI.
* Make sure that your MIDI device is checked in the Input Devices menu located under the MIDI menu in Pro Tools
LE.
* Make sure that you have the appropriate filters selected in the Input Filters menu located under the MIDI menu in
Pro Tools LE.
* Make sure that "Run MIDI in background" is checked in the OMS MIDI setup window located under the Setups
menu in Pro Tools LE.
* Make sure that you have the correct MIDI channel selected and that the MIDI track is in record enabled.
* If you are not actually recording yet but want to monitor the signal through an auxiliary, make sure that Pro Tools
LE is set to Input Monitor only under the Operations menu.
* Try restarting the Mac again after confirming the previous steps to make sure that the serial ports get reset.
Pro Tools 5.1 Index | All FAQ Index
Pro Tools 6.0
I have the Digi 002pack plug-ins that came with my Digi 002 and Pro Tools LE 5.3.2 for OS 9. How do I upgrade these
for Pro Tools 6 and Mac OS X?
How do I upgrade the plug-ins that came with my Digi 001 Factory bundle for use with Pro Tools LE 6 and Mac OS X?
-9014 Error with Mbox
"Unable to Create DAE Deck" on Pro Tools 6.0 with Mac OS 10.2.4 or 10.2.5. DigiTest doesn't see the installed
hardware.
There is no OS X version of the Mbox Firmware updater.
After accidentally unplugging one of my Firewire drives while Pro Tools 6.0 was launched, I seemed to have lost the
basic functions of my workspace. After rebooting my machine and relaunching Pro Tools, if I try to Reveal the contents of
an AUDIO CD, I get an error and a CRASH.
When chasing time code or machine control, Pro Tools 6.0 does not record MIDI.
Icon status for locked files no longer auto update in browsers when changing to unlocked and vice versa.
Intermittant, but reproducible SCSI bus hangs occurring during playback with the ATTO UL3D.
Processing a region with an audiosuite plug-in while a track is recording causes an assertion error to be displayed in the