User guide

4. Go to the EDL menu and choose "Select All Events". At this point, everything in the session is selected in both
the EDL window and the source bin.
5. Go to the Source Audio menu and choose Clear Selected. It will throw a dialog box that says "Are you sure you
want to clear the selected sources? This command cannot be undone." Click yes.
6. All of the sources should have disappeared from the source bin and the EDL window will show all of the events
from the EDL in italicized font indicating that there are no sources created for those events.
7. Go to the EDL menu and choose Create Sources.
This preference directly effects how PostConform names the sources in the source bin. With the preference on,
PostConform will use the comments field as names for the sources in the source bin. With the preference off,
PostConform will instead use its funky naming convention for the sources in the source bin.
PostConform Index | All FAQ Index
PRE
What is the power consumption of PRE?
What is included with my PRE?
What are the system requirements for PRE?
What are the specifications for the Digidesign PRE?
Where can I find a Pinout diagram for the DB-25 connector on the PRE?
What are the main features of PRE?
Why do I hear clicks when changing the gain on my PRE?
[26835]
What is the power consumption of PRE?
60 watts @110V (North America)
120 watts @ 240V (Europe)
PRE Index | All FAQ Index
[26828]
What is included with my PRE?
- PRE
- AC Power cable
- PRE guide
PRE Index | All FAQ Index
[26829]
What are the system requirements for PRE?
When used as a stand-alone microphone preamplifier,
PRE is ready to use.
For remote control within Pro Tools, PRE requires:
• Pro Tools TDM hardware and software:
• Pro Tools HD-series system, running
Pro Tools TDM 6.0 or later on Macintosh
OS X