User guide

[6852]
Can I still use virtual synths and samplers with Pro Tools via DirectConnect when using Mbox?
Yes.
Mbox Index | All FAQ Index
Motor Mix
I cannot get more than one Solo button selected on the Motor Mix when holding the Shift key.
Cannot control any Orange Vocoder parameters with my MIDI controller.
No communication between Motor Mix (or HUI) and OMS when using a MIDIman MIDIsport USB interface.
There does not seem to be communication between my Motor Mix and Pro Tools. Motor Mix LCD reads "Motor Mix (tm)
is ready for a session", though a Pro Tools session has already been launched.
My Motor Mix is not communicating with Pro Tools; Motor Mix responds to movement of the Pro Tools faders, but Pro
Tools faders will not respond to movements of Motor Mix faders. A communication error message keeps appearing in
Pro Tools.
How do I set up OMS to use Motor Mix if I AM NOT using a Mark of the Unicorn (MOTU) USB MIDI interface?
When I try to locate to a memory location using Motor Mix in Transport Mode, Pro Tools does not respond. Other
communication functions seem normal.
How is "Fader Punch Mode" on the Motor Mix different than standard Pro Tools mode? It seems that I can perform the
same automation functions in either.
How can I get the latest Motor Mix firmware?
How do I set up OMS to use Motor Mix if I AM using a Mark of the Unicorn (MOTU) USB MIDI interface?
How do I check the firmware version currently installed on my Motor Mix?
Where is the Record button on my Motor Mix?
Why does Pro Tools keep crashing? I'm seeing an assortment of errors and / or the computer keeps freezing up. I'm
using a Mark of the Unicorn USB MIDI interface with one or more Motor Mix units.
Cannot instantiate a plug-in beyond the eighth fader when using multiple motor mix units.
What button do I press on Motor Mix to engage record?
[27732]
I cannot get more than one Solo button selected on the Motor Mix when holding the Shift key.
With the Latch Solo Buttons preference disabled in the Pro Tools you cannot get more than one Solo button to
activate on the Motor Mix when holding the Shift key on either the Motor Mix or Apple keyboard. The workaround is
to hold either Shift key and use the mouse to select Solo in Pro Tools. This is seen with Pro Tools 5.x on OS 9 and
Pro Tools 6.x on OS X.
Motor Mix Index | All FAQ Index