User guide

Digi Cables Index | All FAQ Index
[7260]
Additional DigiSnake compatibility information
- All DigiSnakes are 110 ohm digital grade cable (except TDIF-TDIF data cable)
- TDIF-TDIF DigiSnake is for TDIF use only. Use only on TDIF digital connectors.
- The +4/-10 Padded DigiSnake is an output-only snake for use only on the 192 I/O +4 dBU output port. You can
use any other snake for the 192 I/O -10dBv input connector.
- The ProControl snake has one DB25 connector with a reversed pin-out to match the ProControl. If you use this
cable with other gear, the channels will be reversed (ie channel 1 will appear on channel 8, channel 2 will appear on
channel 7, etc.).
- Please use the cable bales for connector stress relief.
Digi Cables Index | All FAQ Index
[7261]
How much do DigiSnakes cost?
Check the All Products Index under Cables in the Products section of the website, or contact your Digidesign Dealer
Products: http://www.digidesign.com/products/
Dealers: http://www.digidesign.com/aboutus/dealers/
Digi Cables Index | All FAQ Index
[7262]
What features do DigiSnakes offer?
- Uniquely designed for use with Digidesign products
- Custom colored and labeled
- Include stress relieving cable bales
- Lifetime warranty
- 110 Ohm "Digital Grade" cable suitable for analog or digital use
- Available from your local Digidesign dealer, making for an easy, quick cable solution to get your Pro Tools|HD
system up and running immediately.
Digi Cables Index | All FAQ Index
[7263]
What are those cable bales on the ends of the DigiSnake for?
These are used to relieve stress on the D-Sub connectors of the 192 I/O. PLEASE USE THEM! Tack the cable bale to
some nearby solid rack structure to release any stress on the 192 I/O's connectors.
Digi Cables Index | All FAQ Index
[7267]
What products use DigiSnake cables?
- 192 I/O (A/D card, D/A card, and Digital I/O card)
- 192 Digital I/O (has 2 digital I/O cards, but no Analog I/O)
- 192 A/D option card (expansion for 192 I/O)
- 192 D/A option card (expansion for 192 I/O)
- 192 Digital option card (expansion for 192 I/O)
- Control|24
- ProControl
- PRE