User guide

I/O setup is easiest to manage if all routings are defaulted upon each coarse sample rate resolution change.
Digi 002 Mac Index | All FAQ Index
[25821]
Sampletank and bundled 002 plugs-ins are not playing back. I can see level on the MIDI track but no
level on the aux track.
SampleTank uses RAM to playback samples. 320 MB of RAM is recommended to use Pro Tools LE 5.3.2 with
SampleTank.
discovered by Digi Sales rep with Sony Vaio
Digi 002 Mac Index | All FAQ Index
[25678]
Performance is poor on my PowerBook. I get lots of -6085, -6086 errors.
If "Allow Processor Cycling" is enabled in the Energy Saver control panel, The Pro Tools transport is subject to very
poor performance and will throw -60xx errors. Always disable "Allow Processor Cycling" for normal performance.
Applies to Powerbooks only.
Digi 002 Mac Index | All FAQ Index
[25715]
Noise pops are emitted from the Digi 002 Monitor Outputs while making a FireWire connection with
computer.
It is recommended to always use the hardware MUTE button when connecting/disconnecting a FireWire drive to the
computer.
From the Read Me for Pro Tools LE v.5.3.2
Digi 002 Mac Index | All FAQ Index
[25769]
What are the steps for the most stable Digi 002 system boot-up?
1) Start with CPU and all FireWire devices powered-off.
2) Connect FireWire drive(s) to CPU.
3) Connect 002 to FireWire drive(s) or to second FireWire port on CPU.
4) Boot CPU.
5) Once CPU is up, boot FireWire drives.
6) Once drives mount, boot 002.
Note: The main point here is that most stable FireWire performance occurs if the CPU is booted before FireWire
peripherals are powered-on.
Note #2: We suggest connecting FireWire components while everything is powered-off to help guard against the
possibility of a bad (dangerous) connection once everything's powered-on.
Digi 002 Mac Index | All FAQ Index
[25672]
I am unable to use the smallest buffer sizes without encountering 9092, 9093, or 6086 errors on my
laptop when using Pro Tools LE 5.3.2 and a Digi 002.
Some laptop computers do not perform well when using the smallest Hardware Buffer setting. If you are
experiencing frequent errors, try increasing the Hardware Buffer size.
taken from the Pro Tools LE 5.3.2 Read Me
behavior encountered with Sony VAIO and PowerBook G4|800
Digi 002 Mac Index | All FAQ Index
Digi 002 Win