User guide

response code to authorize D-verb or it requests a diskette to authorize?
Any users of Pro Tools systems that are having problems authorizing their D-Verb TDM, RTAS, or AudioSuite D-Verb
plug-ins should download D-Verb 1.8.1
This version is compatible with Pro Tools v5.1.x/5.2 TDM & Pro Tools LE v5.1.x/5.2.1
It is available at http://www.digidesign.com/download/dverb
D-Verb 1.8.1 is not compatible with Pro Tools FREE.
With Pro Tools LE version 5.0.1 you will need a floppy to authorize the plug in, D-Verb. This floppy authorization key
diskette should be included with your version of Pro Tools.
If you did not receive this floppy, register the product and a back up floppy will be distributed to you. If you did not
receive an authorization disk call technical support to confirm that you are registered.
Digi 001 Win Index | All FAQ Index
[4388]
When I try to launch Pro Tools LE for Windows the message "Missing cfd.dll" or "Cannot find cfd.dll"
appears on the screen.
These errors can occur if you install Pro Tools before installing the Wave Driver, or have an incorrect driver
installation. Resources must be assigned to the hardware before Pro Tools is installed. Therefore, it is imperative
that you follow the installation procedure documented in Chapter 3 (specifically, pages 19-21) of the Getting
Started with Digi 001 Guide.
This guide is available for download at http://www.digidesign.com/support/documents.html
Digi 001 Win Index | All FAQ Index
[4393]
How do I optimize my PC for use with a Windows Digi 001, Tool Box, or Pro Tools Free system?
Start with the fastest Pentium III or AMD Thunderbird Processor you can afford (single processor) and at least 192
MB of RAM.
IMPORTANT: See Dig i001 for Windows compatibility section of the Digidesign Website for complete compatibility
requirements: http://www.digidesign.com/compato/
We have seen better performance on computers that have less components attached and non-custom versions of
the BIOS or Windows. For maximum performance, a dedicated qualified ATA/IDE or SCSI disk drive with FAT32 file
system is required.
All Pro Tools LE sessions should be stored on a dedicated drive and all Digidesign system files should be stored on
the system boot drive. Although it is possible to record sessions to your PC's boot drive, this is not recommended
and full 24-track performance is not guaranteed.
After Installing your Digi 001 hardware and software in your PC, please make the following adjustments to your
Windows settings to ensure optimal performance:
Disable Auto-Insert Notification for CD-Rom and removable media drives:
* From the desktop, right-click My Computer and choose Properties.
* In the System Control Panel, click the Device Manager tab.
* Locate and double-click the device for your CD-ROM. In the CD Rom Properties dialog, click the Settings tab.
* Deselect the option for Auto Insert Notification and click OK.
* Repeat for any removable media devices, such as JAZ and ZIP drives.
* Close the System Control Panel.