User guide
Disclaimer: Digidesign cannot verify that the information in this forum will provide full functionality or performance.
Please refer to the Compatibility Documents for Digidesign's official system requirements.
Digi 001 Win Index | All FAQ Index
[4193]
When trying to launch Pro Tools LE on Windows 98 or Windows ME, the message "DAE error -9113"
appears onscreen.
This error occurs if the WIN 98 Wave Driver is not installed, is disabled, or is installed incorrectly. Resources must
be assigned to the hardware before Pro Tools is installed. Therefore, it is imperative that you follow the installation
procedure documented in Chapter 3 (specifically, pages 18 and 19) of the Digi 001 or Toolbox XP Quick Start
Guides.
These guides are available for download at http://www.digidesign.com and are shipped with their respective
products.
Digi 001 Win Index | All FAQ Index
[4194]
When playing back a session, "You're running out of CPU power. Take out some plug-ins to free up CPU
power (-9128)" appears onscreen. How can I get more RTAS plug-ins in my session?
The amount of plug-ins that can be instantiated in a given session is largely determined by the CPU processor
speed. Plug-in count will vary from PC to PC, but in general, the faster the processor, the more RTAS plug-ins, real-
time automation, and track edits you will be able to apply to your session.
Because the Digi 001 is a host-based processing system, the software is reliant upon the CPU for all necessary
calculations and does not receive any additional DSP support from the hardware. When you have finally exceeded
the limits of your CPU, an error message stating "You're running out of CPU power. Take out some plug-ins to free
up CPU power (-9128)" will appear onscreen. From this point, it will be necessary to de-instantiate one or more of
the plug-ins to achieve playback. To squeeze the highest RTAS plug-in count out of your system, you must manage
your CPU resources wisely. Here are a few recommendations for optimizing your CPU usage:
1) From the Pro Tools menu choose Setups > Hardware. Set the CPU Usage to 75 or 85%. This setting determines
the percentage of CPU processing the software will be able to use from your system's total
CPU resources.
2) When you have completed tracking in your Pro-Tools LE session and are ready to mix, choose Setups >
Hardware and set the Hardware Buffer size to 1024. This may allow instantiating of one or more additional RTAS
plug-ins as compared to the lower Hardware Buffer settings. You can experiment with this setting to see how it
affects plug-in performance.
3) The RTAS D-Verb plug-in is the most CPU intensive of the RTAS DigiRack plug-ins. Most high end systems will
max out at 4-5 RTAS D-Verb instantiations therefore it is not practical to instantiate a separate D-Verb on every
track. A more appropriate alternative would be to create a Stereo Auxillary track with the RTAS D-Verb instantiated,
and then bus any audio tracks that require effecting to this track. You can apply this method to other RTAS plug-ins
as well. The goal is to share one RTAS instantiating between tracks that require similar effecting.
4) Keep in mind that the amount of automation and the number of edits in your session will directly affect the
amount of RTAS plug-ins available. Conservation in one area will free up more CPU resources for another. Having
unnecessary applications running in the background can also lower the amount of available RTAS plug-ins.
5) Remember that Audiosuite plug-ins do not require any CPU resources. Most RTAS plug-ins have an Audiosuite
counterpart which makes Audiosuite processing practical when CPU resources are running low. Since most plug-in
settings are savable as well as interchangeable between RTAS and Audiosuite architectures, a track instantiated
with an RTAS plug-in setting will sound similar to the same waveform processed with it's Audiosuite counterpart.
6) On a Mac in OS 9, if you are not planning to use QuickTime Musical Instruments for playback of General Midi
sounds or for a Click Track, you can turn of the QuickTime Synth in OMS (In OMS setup document, double-click on
the QuickTime logo and disable the QuickTime Synth) which may allow additional instantiating of one or more RTAS
Plug-Ins. You must reboot the CPU for this to take effect.
7) On Hyper Threading Windows XP machines with Pentium 4 processors, disable Hyper Threading in the BIOS.