User guide

How do I authorize D-verb for Windows 98 or ME? D-verb does not seem to accept the challenge response code to
authorize D-verb or it requests a diskette to authorize?
When I try to launch Pro Tools LE for Windows the message "Missing cfd.dll" or "Cannot find cfd.dll" appears on the
screen.
How do I optimize my PC for use with a Windows Digi 001, Tool Box, or Pro Tools Free system?
[25497]
In Pro Tools LE 5.3.1 for Windows XP the Input Gain controls are working backwards.
If you add Input Gain to an analog input on the Digi 001, Pro Tools actually decreases the Input Gain for that track.
The inverse is also true: If you decrease the Input Gain for an analog input on the Digi 001, the Input Gain in
increased.
In Pro Tools > Setups > Hardware Setup.
This is a bug and will be fixed in a future version of Pro Tools.
The workaround is to adjust the Input Gains in a backwards manner.
Digi 001 Win Index | All FAQ Index
[8266]
How can I update the three Bomb Factory Plug-Ins included with the Digi 001 Factory bundle so that I
can use them on Pro Tools LE 5.3.1 for Windows XP?
The Bomb Factory Plug-ins included with the Digi 001 Factory bundle need to be updated to version 3.0.2 in order
to use them with Pro Tools LE 5.3.1 for Windows XP.
From the Pro Tools LE 5.3.1 for Windows XP Updates page in the Support/Downloads section of the Digidesign
website:
http://www.digidesign.com/download/winup
To update your Digi 001 Factory Bundle software from Bomb Factory for Windows XP compatibility, you will need to
download the free update for the 3 Bomb Factory plug-ins included with the Digi 001 Factory:
Classic Compressors: 1176
Classic Compressors: LA-2A
moogerfooger™ Lowpass Filter
To Download the free update:
1 - Go to www.bombfactory.com
2 - Click on "downloads"
3 - Click on "demos/updates"
4 - Fill out the form to create an account, and Bomb Factory will email you instructions to access downloads.
5 - Once there, download the following: 001 Factory Free Windows XP Update
These updates require the preauthorized iLok included with your Digi 001 Factory purchase.
Digi 001 Win Index | All FAQ Index
[7870]
How do I generate a MIDI click track / Setup MIDI for a controller keyboard?
Pro Tools LE can generate a click track by triggering a MIDI controller keyboard or sound module. To enable the
click track:
- Connect the MIDI OUT of your controller keyboard to the MIDI IN of the Digi 001 and the MIDI OUT of the Digi
001 to the MIDI IN of the controller keyboard.
- Choose the MIDI pull-down Menu in Pro Tools LE and verify that MIDI Thru is checked.