User guide

I'm unable to get MIDI signal into Pro Tools LE via the Digi 001 on OS 9.x.
* Make sure that the Digi 001 OMS driver is in the OMS folder, located in the System folder, and that the 001 is
recognized by the OMS Studio Setup.
* Make sure the "Use Apple SerialDMA when available" is unchecked in the OMS preferences which are located
under the Edit menu of OMS. If you uncheck it, you must restart the CPU for the change to take affect.
* Make sure that you have defined an input device in the OMS Studio Setup for your MIDI.
* Make sure that your MIDI device is checked in the Input Devices menu located under the MIDI menu in Pro Tools
LE.
* Make sure that you have the appropriate filters selected in the Input Filters menu located under the MIDI menu in
Pro Tools LE.
* Make sure that "Run MIDI in background" is checked in the OMS MIDI setup window located under the Setups
menu in Pro Tools LE.
* Make sure that you have the correct MIDI channel selected and that the MIDI track is in record enabled.
* If you are not actually recording yet but want to monitor the signal through an auxiliary, make sure that Pro Tools
LE is set to Input Monitor only under the Operations menu.
* Try restarting the Mac again after confirming the previous steps to make sure that the serial ports get reset.
Digi 001 Mac Index | All FAQ Index
Digi 001 Win
In Pro Tools LE 5.3.1 for Windows XP the Input Gain controls are working backwards.
How can I update the three Bomb Factory Plug-Ins included with the Digi 001 Factory bundle so that I can use them on
Pro Tools LE 5.3.1 for Windows XP?
How do I generate a MIDI click track / Setup MIDI for a controller keyboard?
How do I sync the Digi 001 with an ADAT using the Mark of the Unicorn MIDI Timepiece AV on Windows?
When I try to launch Pro Tools LE for Windows the message "This demonstration version of ______ has expired"
appears.
Are Pro Tools LE for Windows sessions transferable to Pro Tools LE for Macintosh?
How can I avoid -9093 errors on my Pro Tools LE system?
What PC is recommended for use with my Windows Digi 001 system?
When trying to launch Pro Tools LE on Windows 98 or Windows ME, the message "DAE error -9113" appears onscreen.
When playing back a session, "You're running out of CPU power. Take out some plug-ins to free up CPU power (-9128)"
appears onscreen. How can I get more RTAS plug-ins in my session?
Why is there a small amount of delay while monitoring audio when I am recording?
How do I hear what my MIDI Device (keyboard, drum machine, etc.) is playing in the Pro Tools LE mixer?
Do I need a SCSI drive for optimal performance with a DIGI 001 on Windows 98ME?