User guide

and stability. This DAE should be used with Pro Tools 4.3x and Waveshell 2.8.1. Pro Tools 5 users should use DAE/
DSI 5.0 w/ Waveshell 2.81.
3.4.2 For anybody who uses Pro Tools 4.3.1 or 4.3.2, and anybody using Digidesign hardware with 3rd party apps
on the Blue/White G3 and Yikes model (PCI Graphics) G4.
3.4.1 For Project II and all hardware systems running Pro Tools 4.3, it fixes a problem with the sync mode pop-up
when using Direct I/O and the ADAT Bridge I/O. This version also enables PostConform to use Pro Tools|24 and Pro
Tools MIX hardware.
3.3 DAE 3.3 is the version that ships with Pro Tools 4.2.
** DAE 3.3 is the Highest version to support Nubus machines **
3.2.3+ Compatibility update for 882|20 and Tascam DATs
3.2.3 For all hardware systems running Pro Tools 4.1.1
3.2.1+ Only for d24 owners using a Bit-3 expansion chassis
3.2.1 Only for PT 4.1 running on d24, increases PT|24 track count to 32.
3.2 DAE 3.2 is the version that ships with Pro Tools 4.1.This is for PT 4.0.1 users on 68k machines, it fixes the
destructive record bug.
3.1.1 DAE 3.1.1 is the version that ships with Pro Tools 4.0.
DAE Index | All FAQ Index
[6255]
DAE and Pro Tools 3.x Compatibility
3.03 3rd party sequencer/DAE apps
3.01 Pro Tools 3.22 - PCI only
3.0 Pro Tools 3.21 -- PCI Only
- Digital Performer 1.7 only, available from http://www.motu.com
2.95 DAE 2.95 is the version that ships with Pro Tools 3.2.
DAE Index | All FAQ Index
[6256]
DAE and Session / Pro Tools 3.x & 2.x Compatibility
- DAE & DSI DO NOT match -
1.44 (DSI 2.94) Session 2.0 on PCI Macs
1.43 (DSI 2.93) Session 2.0 -- Additional CPU support
1.42 (DSI 2.92) Recommended for Pro Tools 3.1 & Session 2.0 (Nubus)
1.4 (DSI 2.9) Version originally shipped with Pro Tools 3.1
1.32 (DSI 2.8 or 2.81) Recommended for Pro Tools 3.0 or Session 8 1.1
1.3 (DSI 2.8) 3rd Party Sequencer / DAE applications
1.12 (DSI 2.6) 3rd Party Sequencer / DAE applications
1.1 (DSI 2.6) Session 8 MAC 1.1
1.09 (DSI 2.5) Pro Tools 2.5 and 2.51