User guide

DAE and Pro Tools 4.x Compatibility
DAE and Pro Tools 3.x Compatibility
DAE and Session / Pro Tools 3.x & 2.x Compatibility
[6253]
DAE and Pro Tools 5.x Compatibility
DAE 5.0.1 DAE 5.0.1 is the version that ships with Pro Tools 5.0.1 and 5.0.1 LE and fixes the following problems.
Digisystem INIT Error
- Having too many drivers (Hard Disk, USB Extensions, etc.) no longer causes the Digisystem INIT to report that 2
Digisystem INITs are loading.
Mac TDM systems
- Launching Pro Tools no longer results in the error "A Digisystem INIT is required" when the USB Floppy Enabler
(v1.2) is installed and enabled. Note: USB Floppy Enabler 2.1.1 was current as of August 2000.
5.0P 5.0P allows Post Conform and Pro Tools to run at the same time (fixed in 5.0.1).
- Available on the Post Conform 2.0 installer disk. NOT automatically installed.
- Active in Background must be disabled in Pro Tools.
5.0 cs4 Version 5.0cs4 is an interim release that can be used with Pro Tools 5.0 TDM and Pro Tools 5.0 LE Systems.
Preliminary testing has shown that this DAE/DSI combination fixes the following problems (addressed in versions
5.0cs1-cs3):
Digi 001 systems
- Cannot generate MIDI Time Code (MTC) from the Digi 001 MIDI Output.
- Analog Inputs 2, 4, 6 and 8 are delayed by 1 sample. Analog Outputs 1, 3, 5 and 7 are delayed by 1 sample.
- S/PDIF Input 2 (R) is delayed by 1 sample and S/PDIF Output 1 (L) is delayed by 1 sample.
TDM systems with DSP Farm 1 cards
- Certain Plug-Ins, e.g. D-Verb, are problematic (audio dropouts or no wet signal) when loaded on the first chip of a
DSP Farm 1 card.(these have serial numbers below FF09226)
5.0 cs3 Fixed the plug-in issue on DSP Farm I's & the analog phase (sample delays on i/o) issue with the Digi 001.
5.0 cs2 Not releasedÉ fixes rolled into 5.0 cs3
5.0 cs1 Fixed the ability to output MTC directly from the Digi 001 interface.
5.0 DAE 5.0 is the version that ships with Pro Tools 5.0 and 5.0 LE.
Third-party applications that access DAE may need this version in order to work on an Apple G4 &/or OS 9.x.
DAE Index | All FAQ Index
[6254]
DAE and Pro Tools 4.x Compatibility
3.4.2 cs1 DAE 3.4.2cs1 is a beta release that allows Pro Tools 4.3.x to work with OS9.
3.4.2 f9 Interim release for users of Pro Tools TDM and Waveshell 2.7 and 2.8 with improved memory management