User guide

ManualsBrandsDigiDesign ManualsMedia Converter1622 O

1

2

3

4

5

6

7

8

9

Can you use the 1622 with a Y-cable?

How do I adjust the input gains on my 1622?

The 1622 is not showing up properly. It looks like the 1622 is being called 888/24 #4.

The 1622 is not showing up at all.

Is there any way to save the level gain stages for the 1622 on each song?

Can a 1622 be used in standalone mode as a 16 to 2 line mixer?

I get no input on channels 1-2 of my 1622.

I want to use the 1622 in standalone mode, but when I boot my computer switches out of standalone mode.

I have a USD and a device that can convert the ADAT proprietary sync to SMPTE how should I set it up?

[4350]

Can you use the 1622 with a Y-cable?

No, it uses all 16 available inputs and outputs on a mix card. Because of this it requires a special 16 channel

peripheral cable.

1622 I/O Index | All FAQ Index

[4351]

How do I adjust the input gains on my 1622?

The analog inputs are 1/4 inch TRS and can be INDIVIDUALLY calibrated from +4 to -10 in the Hardware Setup>

Other options. These connectors accept balanced & unbalanced connections. The analog outputs are 1/4 inch TRS

and are factory calibrated at +14 headroom. (They mirror outputs 1 and 2 in Pro Tools)

1622 I/O Index | All FAQ Index

[4352]

The 1622 is not showing up properly. It looks like the 1622 is being called 888/24 #4.

Click the I/O labels factory reset button. Note that you cannot hook up a 1622 to a DSP farm.

1622 I/O Index | All FAQ Index

[4353]

The 1622 is not showing up at all.

- Make sure the cables to the 1622 are firmly seated.

- Make sure you have DigiSystem Init and DAE version 5.0 or later.

1622 I/O Index | All FAQ Index

[4354]

Is there any way to save the level gain stages for the 1622 on each song?

Level gain stages are saved in the Pro Tools session. Some third party applications that use direct I/O do not save

this information with their "session documents".

The "Store" button in the "Other options" dialog box will store your trim settings when used in stand alone mode.

1622 I/O Index | All FAQ Index

[4355]

Can a 1622 be used in standalone mode as a 16 to 2 line mixer?