User guide

HD 2 license card v.1.0 = d2/d3 (license card) , DPP-1 (text), D-fx (text), Maxim, Big Bottom & Aural Exciter
HD 3 license card v.1.0 = d2/d3 (license card) , DPP-1 (text), D-fx (text), Maxim, Big Bottom & Aural Exciter, D-fi,
Drawmer, Sound Replacer, SurroundScope
Authorization Index | All FAQ Index
[26767]
Can I use any iLok to authorize my HDpack plug-ins?
The HDpack license cards are designed to be used only with the HD iLok that's included with an HD system (PID#
ends in -600 or last four digits of the second line ends in 9966).
Attempting to authorize these cards to any other iLok is not supported and may result in authorizations being lost.
Things to check if you're having problems authorizing any of the HDpack plug-ins:
- Verify that it is an HD iLok (PID# ends in -600 or last four
digits of the second line ends in 9966).
- Verify the version of the HDpack license card to determine
which authorizations are on the card
- Verify that you are using the correct HDpack Installer CD
- Verify that current PACE InterLok drivers are in use
- Verify that the license card is inserted correctly within the iLok
when authorizing a plug-in
HDpack1, 2, or 3 license cards, version 1.0 through 4.0
For more information on HDpack plug-ins see the iLok Information Page and Pro Tools|HDpack Updates on the
Digidesign website
Authorization Index | All FAQ Index
[25935]
"Error while verifying your authorization. Result Code: 12101"
This error can occur if PACE Interlok Drivers 4.1.3 are installed and the product is not yet authorized. Interlok 4.1.3
supports iLok but has discontinued support for floppy disk authorization. Any product that can be authorized with
floppy disk is susceptible to this error.
The Interlok extensions include:
Interlok Engine v.4.1.3
USB iLok Driver v.4.1.3
This was first discovered on Pro Tools 5.3.1 on HD when trying to authorize MachineControl and DigiTranslator 2.0
(which can be authorized by either iLok or floppy disk). The workaround is to upgrade to Interlok Drivers 4.1.4 or
higher, or downgrade to Interlok Drivers 4.1.1 or lower (the Pro Tools 5.3.1 Installation CD includes Interlok Drivers
version 4.0.7).
Authorization Index | All FAQ Index
[8169]
After updating to Pro Tools 5.3.1 for HD (Macintosh version), several plug-ins won't see the iLok
authorization key: Focusrite d2, Maxim, and the D-Fi Bundle (LoFi, RectiFi, SciFi, and VariFi).
The original iLok authorized versions of these plug-ins should still be located in: Macintosh HD > Obsoleted
Digidesign Software folder > DAE Folder > Plugins folder.
Move these copies of the plug-ins back into the main plug-ins folder: Macintosh HD > System Folder > DAE Folder
> Plug-Ins folder
Alternately, you can choose to reinstall these plug-ins from the HD|Pack Installer, but you must first remove the
newer versions from the Plug-Ins folder, otherwise you will end up with duplicate versions of these plug-ins (and
Pro Tools will still load the floppy authorized versions only).
Note that the initial posting of the Pro Tools 5.3.1 TDM updater for Mac installed DINR plug-ins that needed to be
replaced using the process described above. The 6/19/2002 posting of the installer instals the iLok authorized