User guide

Can I unplug the Mbox while Using the ASIO Driver 6.1.1 in Windows XP?
How do I fix an ASIO System Overload error in Logic Audio on Windows XP?
What versions of Pro Tools will work with the Digidesign ASIO Driver 6.1.1?
How many channels are supported by ASIO DirectIO and/or Core Audio?
Where do I find the ASIO Digidesign Direct I/O Driver for Mac OS 9x?
[27438]
What were the primary known limitations of the previous ASIO Drivers. Have these limitations been
fixed?
These two main issues have been fixed:
The ASIO Driver 5.3.2b2 could not be installed on a system with the Digidesign WaveDriver already installed. The
WaveDriver was removed when you install the ASIO Driver. This was fixed with version 6.1 of the ASIO driver
included with all Pro Tools 6.1 systems. The ASIO Driver 6.1.1 and Digidesign WaveDriver 6.1.1 can both be
installed at the same time.
The beta ASIO Driver 5.3.2b2 and release version ASIO Driver 6.1 could not be used with the MIDI ports on the
Digi 001 and Digi 002. This is fixed with version 6.1.1. The MIDI ports on the Digi 002, Digi 002 Rack, and Digi 001
can be used with the ASIO Driver 6.1.1.
ASIO Driver Index | All FAQ Index
[27439]
Is there a Mac OS X version of the Digidesign ASIO Driver?
No. The Digidesign Core Audio Driver is used on Mac OS X. Also, in a joint collaboration with Propellerhead
Software, Digidesign has added Rewire 2 support with all Pro Tools 6.1 and higher systems for Mac OS X and
Windows XP.
ASIO Driver Index | All FAQ Index
[27440]
With the ASIO Driver, will it be possible to use non-Digidesign hardware (such as MOTU or RME cards)
with Pro Tools software?
No. The ASIO Driver can only be used in configurations with Digidesign hardware and software programs that
support the ASIO standard.
ASIO Driver Index | All FAQ Index
[27442]
Can you use Digidesign hardware along with the ASIO Driver without installing Pro Tools?
Yes, ASIO Driver 6.1.1 can also be used as a stand alone driver (without Pro Tools), with any of the supported
Digidesign hardware systems. For compatibility check the Digidesign ASIO Driver page at www.digidesign.com/
download/asio
ASIO Driver Index | All FAQ Index
[27445]
How do I remove the ASIO Driver?
1. Choose Start > Control Panel.
2. Double-click the Add or Remove Programs icon.
3. From the Currently installed programs list, select Digidesign ASIO Driver.
4. Click the Change/Remove button.
5. Click OK to remove the ASIO Driver.