User guide

No. The digital I/O's on the 96 and 96i I/O interface enclosures cannot do real-time sample rate conversion.
Likewise, the digital I/O's on the 192 Audio Interface enclosure do not do sample rate conversion. Only the digital I/
O's on the 192's Digital I/O card have this feature.
96 I/O Index | All FAQ Index
[7429]
What interfaces are supported on the Legacy Expansion port of the 96 I/O and 96i I/O?
You can connect two 8-channel interfaces (such as the 888|24 or 882|20) or a single 16-channel interface (1622 I/
O, 24-bit ADAT Bridge I/O, or the original ADAT Bridge I/O) for expanded input and output options, using their
original cables.
96 I/O Index | All FAQ Index
[7430]
Is it possible to record at 192 kHz with one 192 I/O Audio Interface and one 96 I/O or 96i I/O Audio
Interface? Can the 96 I/Os clock to the higher sample rate of the 192?
No. When the session sample rate is set above 96 kHz only the 192's inputs and outputs will be available.
96 I/O Index | All FAQ Index
[7431]
What is the proper clock connection between an HD Audio Interface (96 I/O, 192 i/O) and a Legacy
Interface (888|24, 882|20, etc...)?
Connect the Ext. Clock output port on the HD Audio Interface to the Slave Clock In on the Legacy peripheral. The
Legacy peripheral will switch to Slave mode once the proper clock is received from the HD Audio Interface. Always
use the Ext. Clock Out port of the same I/O to which the Legacy peripheral is attached.
If using multiple MIX-series audio interfaces chained off of a single HD Audio Interface, connect the Slave Clock Out
of the first interface to the Slave Clock In of the second interface.
96 I/O Index | All FAQ Index
ASIO Driver
What were the primary known limitations of the previous ASIO Drivers. Have these limitations been fixed?
Is there a Mac OS X version of the Digidesign ASIO Driver?
With the ASIO Driver, will it be possible to use non-Digidesign hardware (such as MOTU or RME cards) with Pro Tools
software?
Can you use Digidesign hardware along with the ASIO Driver without installing Pro Tools?
How do I remove the ASIO Driver?
How do I install the ASIO Driver?
Will there be new versions of the Digidesign ASIO Driver?
Can you use Pro Tools and an ASIO program (or more than one ASIO program) at the same time?
How do I change ASIO Driver settings?
Which programs currently support the Digidesign ASIO Driver?
Does the ASIO Driver support Native Instruments Programs with Windows XP?